Chinese Horizontal stretch wrapper and orbital stretch wrapper

Functions:

This is a Spiral wrapping machine specialized for horizontal shapes such as sheets, Profiles,PIPE, Floor board, proflie… the wrapped package is well-protected & sealed & looks more tidy. The machine can be connecting to the packing line for automatically wrapping.

More machine--click here orbital stretch wrapper

Installation:

The machine shall be mounted on flat & hard ground, where the ground load should be more than 1 ton/m².

Operation(with PLC & Mechanical hand):

Load the products onto the in-feeding conveyor.

Automatic moving the product to wrapping position.

The press down device presses the package automatically.

Automatic wrapping.

Feeding the on-ring material.

Products go through the wrapper for wrapping.

Place the reinforcing wraps to the tail end of the product.

Cutting the material

The orbital stretch wrapper working mode  is classified into manual operating mode and automatic operating mode. “MANUAL” mode is generally used for inspection, adjustment, troubleshooting and specific conditions. In normal operation conditions, “AUTO” mode is adopted.

-------------------------------------------------

Company Name: FHOPE PACKAGING MACHINERY CO.,LTD

Address: 668# ,West Building, Technology of New City,East Beijing Road.

E-mail:  info@fhopepack.com; Fhopepack@gmail.com

Tel:  0086-21-51571522

Fax:     0086-21-51571281

Cell:  0086-013661498250

Website: www.fhopepack.com

The steel coil packaging process with VCI pape and H-protector

1.       In order to proceed with new  proposal, we need primarily  some  documentation and clarifications  as follows:

1.1   Short Description of the Scope of Works.

                                          To pack and secure the coils with corresponding pack code as per the requirement of the customer.

1.2   Short description of the actual manual wrapping operation sequence and wrapping material used during the wrapping process for:

Ø  Local

Steel coil packaging

packing

ü  Cut VCI paper as per requirement of the coil.

ü  Lift coils by EOT crane from production area to the packing area.

ü  Put the coil on VCI packing paper.

ü  Put VCI packing paper at inner diameter of the coil and paste paper with masking tape at inner diameter edges of the coil.

ü  Envelop paper with masking tape on the outer diameter of the coil.

ü  Fold VCI paper on eye side and paste with masking tape at inner diameter of the coil.

ü  Check VCI paper if covering on both eye sides of the coil from outer diameter to inner diameter properly.

ü  Put carton edge protector at inner and outer diameter of the coil together with inner metal sheet.

ü  Insert the galvanized inner diameter ring at inner diameter of the coil on both sides.

ü  Use polyester strap and by using pneumatic / battery operated polyester strapping tools.

ü  Put galvanized steel edge protector at outer diameter edges of the coil on both sides.

ü  Secure the edge protectors by having one (1) circumferential Polyester strap by using pneumatic strapping tools.

ü  Make four (4) eye straps of plastic straps using pneumatic strapping tools.

ü  Cut VCI paper and metal sheet as per requirement of the coil.

ü  Lift the coils by EOT crane from production area to the packing area.

ü  Envelop VCI paper with masking tape on outer diameter of the coil.

ü  Envelop coil with galvanized steel outer diameter sheet and make one outer steel strap & metal seal along with plastic pad by using strapping tools.

ü  Return the coil to the packing area by EOT crane.

ü  Put VCI packing paper at inner diameter of the coil and paste it with masking tape.

ü  Fold VCI paper on eye side and paste with masking tape at inner diameter of the coil.

ü  Check paper if covering on both eye sides of the coil from outer diameter to inner diameter properly.

ü  Put carton edge protector at inner and outer diameter of the coil together with inner metal sheet.

ü  Put galvanized steel side cover together with the galvanized inner diameter ring on both eye sides of the coil.

ü  Put galvanized steel edge protector at outer diameter edges of the coil on both sides.

ü  Secure the edge protectors by having one (1) circumferential steel strap & metal seal along with plastic pad using strapping tools.

ü  Make four (4) eye steel straps & metal seal along with plastic pad using pneumatic strapping tool.

hose coil wrapping machine specialized for plastic coil products

Applications

This is a hose coil wrapping machine specialized for horizontal coil products, such as hose, pipe coil, steel coil, steel wire coil, cable coil, etc. The wrapped package is well protected, sealed and looks tidier. The machine saves labor force and improves work efficiency that plays a key role in your production procedure and is popular in modern packaging industry.

TECHNICAL DETAILS FOR 

HOSE COIL WRAPPING MACHINE

Specifications

Standard configuration listed below. Please contact our sales representative for other configuration.

Basic description

Equipment name: Hose wrapping machine

Quantity: 1 set

Basic Features

Working mode: Semi-auto

Ring speed: 20-90r/min variable speed controlled by inverter

Packing mode: Spiral packing, Rotating ring packs automatically

Noise level: ＜79db（depending on wrapping object）

Installation

The machine shall be mounted on flat and hard ground where it can load more than 1 ton/m².

Wrapping station

l   Rotating ring: Reinforce aluminum cast-solid ring

l   Driving wheels: Polyurethane Rubber

l   Board/Ring height: Adjustable driven by motor(1000mm)

l   Friction between wheels and ring: Adjustable by a belt tension adjuster

l   Ring/rollers speed: Adjustable by inverter

l   Working mode: Soft start and soft top, Ring jog

                 Packing position reset

l   Packing material tension: Adjustable by special brake device

l   Packing material: Can be chosen per your needs

l   The overlap of packing material: Adjustable by frequency inverter

l   Up/Down protective and supporting rollers: Wrapped with polyurethane rubber 

l   Protection device: Protective shield

l   Wrapping mode: Adjustable overlap of the packing material (Optional 10%-90%)

l   Logo taping device

Technical data

l   Object dimensions:

Width: 180-200mm

ID: 200-220mm

OD: 400-700mm

Weight: ≤35kg

l   Machine weight: 1100kg

l   Power output: app. 1.5 KW

l   Power voltage: AC380V, 3 Phase, 60HZ              

l   Packing/wrapping material: PVC film/LLDPE film

                           ID (core section): 50mm, OD: 100-250mm, Width: 70-90mm

         (Others available, such as knit belt, compound paper tape, crepe paper tape, etc.) 

coil packing machine,coil wrapping machinery for steel,cable,wire

The video shows the coil packing machine

Features:

This is Series automatic coil wrapping machine for metal coil was designed mainly for metallurgical industries. The machine could be widely used in the exterior wrapping of circular articles such as Steel Wire Coil,steel belt, bronze belt etc.
Features:
1. Excellent collections. Well-known brands are adopted for main components.
2. The overlap of packing tape can be adjusted by inverter.

3. Level height of turning ring can be adjusted to suit different size of the article.
4. Packing tape tension can be adjusted.
5. Difference packing material can be choosing.
6. Supporting rollers are covered by polyurethane.
7. Up and down supporting rollers are available.
8. Separate electrical box for safe operation and technical testing and trouble-shooting.
9. Separate material carriage and cutter device will make the packing process more efficiency.

10. Guardrails for loading and unloading safety.

11. Soft stop and start

12. Packing position reset.

13. Ring speed adjustable by inverter.

14. Rolls speed adjustable by inverter.

15. Friction between wheel and ring is adjustable.

16. PU wheel which long life using.

17. Automatic material cutting function.

POWER: The main switch of machine power supply which is used to connect or shut off the machine power supply.

EMERGENCY STOP: The control switch which is used to control circuit.   <0}{0>发生紧急情况时按下此开关整机不工作。<}0{>Press this switch to shut down the whole machine in the case of emergency. <0}

MANUAL/AUTO: The working mode of this machine is classified into manual operating mode and automatic operating mode. <0}{0>“手动”一般用作检查、调整机器、排除故障及特定条件下使用。<}0{>“MANUAL” mode is generally used for inspection, adjustment, troubleshooting and specific conditions. <0}{0>正常工作时使用“自动”。<}0{>In normal operation conditions, “AUTO” mode is adopted.

{0>转环启动：在自动模式下通常作为启动按钮（相当于人机界面中“运行/停止”中的“运行”）。<}0{>RING START: It is usually used as startup button in “AUTO” mode. Press the button to make the ring work in “Manual”mode. <0}{0>在手动模式下可使转环运转。<}0{>PrP

{0>转环停止：在自动模式下可使机器停止工作（相当于人机界面中“运行/停止”中的“停止”）。<}71{>RING STOP: It is used to stop the machine in “AUTO” mode. Press the button to make the ring stopped in “MANUAL” mode.<0}

{0>转环复位：可使转环复位。<}0{>RING RESET：It is used to have the ring and the support rollers reset. (Only operate in “MANUAL” mode.)

{0>手动剪刀：用来手动剪切包装带。<}0{>CUTTER: It is used to cut the packaging tape. This button is valid both in “AUTO”and “Manual” mode.<0}

ROLLER RUNNING（FWD/REV）：Used to put the roller under clockwise or anticlockwise under running status in “MANUAL” mode. <0}{0>此开关在自动模式下无效。<}0{>

  

The automatic stretch wrapping machine with turntable and top platen

The stretch wrapping machine feactures:

The system applicable to cartons Automatic products palletizing and wrapping products automatically, after the palletizing and strapping, automatic placement of top films, packaging features such as automatic wrapping. Outside the operation to remove the entire system to replace consumables (trays, film, etc) to run automatically, without human intervention.

Main technical parameters of stretch wrapping machine

1.1 package sizes: l (800~1450) xW (800~1200) xH (300~1800) mm

1.2 cargo weight: 1500kg (max)

1.3 packaging efficiency: (20~35) thanks to/h

1.4 turntable diameter: 1800mm

1.5 the turntable speed: 15rpm (max)

1.6 conveying line velocity: 12m/min

1.7 table height: 400mm

1.8 power unit: 2.5 KW 380V/50HZ

1.9 air working pressure: (0.5~0.7) MPa

1.10 air consumption: 1000ml/min

5.7.2, packaging materials:

2.1 LLDPE stretch film

2.2 thickness: 17~35 μ m

2.3 width: 500mm

2.4 film heart: 76 mm

2.5 roll maximum outer diameter: 260mm

5.7.3, control systems

3.1 the PLC programmable control, Twining layer and frequency settings;

3.2 photoelectric switches, movement of goods measured height;

3.3 reinforcing winding function can be a part of special protection;

3.4 the time setting function.

5.7.4, turntable drive

4.1 drive: chain drive

4.2 table of frequency 0~12 RPM adjustable;

4.3 table geared motor (inverter)

4.4 power supply: 380V 0.75KW

4.5 turntable automatic reset

5.7.5, membrane system

5.1 film power pre stretch body stretching up to 250%;

5.2 double chain structure, stable and reliable;

5.3 film respectively raise or lower speed, film speed adjustable;

5.4 number of top and bottom wrapping individually controlled;

5.5 thin film actuator, a;

5.6 KI film, easy to wear film, stretch die carrier AC motor, converter adjust stretch film tension;

5.7 pneumatic controlled automatic broken-film institutions, effectively improve the working efficiency.

5.8 membrane lifting gear motor (frequency):

5.9 power supply: 380V 0.37KW

5.10 out of membrane transport geared motor (frequency):

5.11 power supply: 380V 0.37KW

5.7.6, conveyor:

6.1 delivery height: 400mm

6.2 roller diameters: ф 76mm

6.3 the roller pitch: 119mm

6.4 the conveyor speed: 12m/min

6.5 transport roller material: carbon steel, passivation of zinc plating

6.6 roller wall thickness: 3.0mm

6.7 transmission chain: 10A

6.8 the rated load: 2000kg

6.9 conveyor reducer (vvvf)

6.10 power supply: 380V 0.75KW

-------------------------------------------------

Company Name: FHOPE PACKAGING MACHINERY CO.,LTD

Address: 668# ,West Building, Technology of New City,East Beijing Road.

E-mail:  info@fhopepack.com; Fhopepack@gmail.com

Tel:  0086-21-51571522

Fax:     0086-21-51571281

Cell:  0086-013661498250

Website: www.fhopepack.com

slit coil packaging line for copper,steel coil...

Automatic coil product packaging series style according your packing prerequisite . The pace of rollers and ring are adaptable to accommodate resources varying in size. The conveyor buckle or encouraging roller could be increased or lowered as well as in some designs, even tilted towards the ideal position for packaging. It could be provided with an ink cartridge coding process , or perhaps imprinter to report terms, schedules, and codes with every close off for every merchandise. Pace of Automatic coil loading devices are substantially faster far more than by physically , it is ideal gear for projects which require minimal room and expenses and better generation rates.The thought of coil packaging line package deal is an layout for important portion of the coil packing devices. The equipment addresses restricted levels of loading resources over all surface areas from the coil. This restricted levels of packing material helps prevent a lot of the air flow through the deal. Covered protective packing material, the potential for moisture to form is reduced, thereby reducing the possibility of corrosion or water spots, by reducing the amount of air in the package.

The ancillary loading is does apply too. This wrapping may include protectors of exterior size, protectors of within diameter , protectors of part wall structure or tummy place materials. These supplies may be incorporated into the device being utilized quickly or applied by hand . This ancillary wrapping guards the coil along with the initially coating of motion picture The ancillary product or service can be produced from plastics to keep up an entirely recyclable bundle.Another level of packaging fabric is then used with respect prerequisite. Another level of packing materials holds the ancillary deal in place and much more guards the inner airtight coating of movie. The outside level will probably be ripped from handling problems. Besides the inner layer remains intact and thus the coil stays protected and sealed, because of the ancillary material is in between which is applied separately by the two layers,

The automatic robot pallet wrapper/wrapping wrapper

The automatic robot pallet wrapper

The automatic robotic wrapper is doing wrapping packaging without limiting in size, height,and weight of product.

Wrapping speed is fast that wrapper. The designing is special for transportation package with easy maintain and opertion.

1．机器参数 Feacture

Weight	325 Kg
Bottary	230 V - 50/60 Hz - 1 PH
Min.pallet size	600 x 600 mm
Max.Height of package	2100 mm
Turning speed	1-16R/min
Pre-stretch	350%
Up Wrapping setting	1-10r
Down wrapping seting	1-10r
Sensor control	adjustable