The video shows the coil packing machine
Features:
This is Series automatic coil wrapping machine
for metal coil was designed mainly for metallurgical industries. The machine
could be widely used in the exterior wrapping of circular articles such as Steel
Wire Coil,steel belt, bronze belt etc.
Features:
1. Excellent collections. Well-known brands are adopted for main components.
2. The overlap of packing tape can be adjusted by inverter.
Features:
1. Excellent collections. Well-known brands are adopted for main components.
2. The overlap of packing tape can be adjusted by inverter.
3. Level height of turning ring can be adjusted to suit different size of the
article.
4. Packing tape tension can be adjusted.
5. Difference packing material can be choosing.
6. Supporting rollers are covered by polyurethane.
7. Up and down supporting rollers are available.
8. Separate electrical box for safe operation and technical testing and trouble-shooting.
9. Separate material carriage and cutter device will make the packing process more efficiency.
4. Packing tape tension can be adjusted.
5. Difference packing material can be choosing.
6. Supporting rollers are covered by polyurethane.
7. Up and down supporting rollers are available.
8. Separate electrical box for safe operation and technical testing and trouble-shooting.
9. Separate material carriage and cutter device will make the packing process more efficiency.
10. Guardrails for loading and unloading safety.
11. Soft stop and start
12. Packing position reset.
13. Ring speed adjustable by
inverter.
14. Rolls speed adjustable by
inverter.
15. Friction
between wheel and ring is adjustable.
16. PU wheel
which long life using.
17. Automatic material cutting function.
POWER: The main switch of machine
power supply which is used to connect or shut off the machine power supply.
EMERGENCY STOP: The control
switch which is used to control circuit. <0}{0><}0{>Press this switch to shut down the whole machine in
the case of emergency. <0}
MANUAL/AUTO: The working
mode of this machine is classified into manual operating mode and automatic
operating mode. <0}{0><}0{>“MANUAL” mode is generally used for inspection, adjustment,
troubleshooting and specific conditions. <0}{0><}0{>In normal operation conditions, “AUTO” mode is
adopted.
{0><}0{>RING START: It is usually used as
startup button in “AUTO” mode. Press the button to make the ring work in “Manual”mode. <0}{0><}0{>PrP
{0><}71{>RING STOP: It is used to stop the
machine in “AUTO” mode. Press the button to make the ring stopped in “MANUAL” mode.<0}
{0><}0{>RING RESET:It is used to have the ring and the support rollers reset.
(Only operate in
“MANUAL” mode.)
{0><}0{>CUTTER: It is used
to cut the packaging tape. This button is valid both in “AUTO”and “Manual”
mode.<0}
ROLLER RUNNING(FWD/REV):Used to put the roller
under clockwise or anticlockwise under running status in “MANUAL” mode.
<0}{0><}0{>
没有评论:
发表评论