The video shows the
coil packing machine
Features:
This is Series automatic coil wrapping machine
for metal coil was designed mainly for metallurgical industries. The machine
could be widely used in the exterior wrapping of circular articles such as Steel
Wire Coil,steel belt, bronze belt etc.
Features:
1. Excellent collections. Well-known brands are adopted for main
components.
2. The overlap of packing tape can be adjusted by inverter.
3. Level height of turning ring can be adjusted to suit different size of the
article.
4. Packing tape tension can be adjusted.
5. Difference packing material can be choosing.
6. Supporting rollers are covered by polyurethane.
7. Up and down supporting rollers are available.
8. Separate electrical box for safe operation and technical testing and
trouble-shooting.
9. Separate material carriage and cutter device will make the packing process
more efficiency.
10. Guardrails for loading and unloading safety.
11. Soft stop and start
12. Packing position reset.
13. Ring speed adjustable by
inverter.
14. Rolls speed adjustable by
inverter.
15. Friction
between wheel and ring is adjustable.
16. PU wheel
which long life using.
17. Automatic material cutting function.
POWER: The main switch of machine
power supply which is used to connect or shut off the machine power supply.
EMERGENCY STOP: The control
switch which is used to control circuit. <0}{0>发生紧急情况时按下此开关整机不工作。<}0{>Press this switch to shut down the whole machine in
the case of emergency. <0}
MANUAL/AUTO: The working
mode of this machine is classified into manual operating mode and automatic
operating mode. <0}{0>“手动”一般用作检查、调整机器、排除故障及特定条件下使用。<}0{>“MANUAL” mode is generally used for inspection, adjustment,
troubleshooting and specific conditions. <0}{0>正常工作时使用“自动”。<}0{>In normal operation conditions, “AUTO” mode is
adopted.
{0>转环启动：在自动模式下通常作为启动按钮（相当于人机界面中“运行/停止”中的“运行”）。<}0{>RING START: It is usually used as
startup button in “AUTO” mode. Press the button to make the ring work in “Manual”mode. <0}{0>在手动模式下可使转环运转。<}0{>PrP
{0>转环停止：在自动模式下可使机器停止工作（相当于人机界面中“运行/停止”中的“停止”）。<}71{>RING STOP: It is used to stop the
machine in “AUTO” mode. Press the button to make the ring stopped in “MANUAL” mode.<0}
{0>转环复位：可使转环复位。<}0{>RING RESET：It is used to have the ring and the support rollers reset.
(Only operate in
“MANUAL” mode.)
{0>手动剪刀：用来手动剪切包装带。<}0{>CUTTER: It is used
to cut the packaging tape. This button is valid both in “AUTO”and “Manual”
mode.<0}
ROLLER RUNNING（FWD/REV）：Used to put the roller
under clockwise or anticlockwise under running status in “MANUAL” mode.
<0}{0>此开关在自动模式下无效。<}0{>
