coil packaging machine and effective wrapper

Coil packaging machine

Note: “Ring speed” and “Roller speed” not only define the running speed of ring and roller respectively, but are also in connection with the overlapping of packaging tape. The two setting parameters can be set by touching. If the ring speed is high and roller speed is low, the packaging tape features a large overlapping range; on the contrary, the overlapping range is small.

<0}

2、Parameter setting for coil packaging machine

Package OD: Input in actual size, with its unit as “mm”.

Package ID: Input in actual size, with its unit as “mm”.

Package Width: Input in actual size, with its unit as “mm”.

ADD Packing Material: When the calculated packing material by PLC is not enough, add the material appropriately to finish the packing process. Setting range 0-3， normally be 0.

Package stop station: Used to revise the deviation of the package stop station. If the package stops when the process is not completed, increase the setting parameter appropriately to finish the process. Setting range 0-50.

Once wrapping: In the Auto control mode, when the needed packing material can be stored in the tape-storage wheel at one time, once wrapping ca be used. It’s usually the default setting of the equipment.

Twice wrapping: In the Auto control mode of coil packaging machine, when the needed packing material can not be stored in the tape-storage wheel at one time, twice wrapping should be used. The packing process is separated into 2parts and machine will stop automatically when half finished.