2015年1月19日星期一

orbital stretch wrapper

Horizontal orbital stretch wrapper
Orbital stretch wrapper


Packaging solution for copper tube, steel tube, steel bar, profile, aluminum section----Orbital stretch wrapper/wrapping machine.

u  Functions:
This is a pipe bundle packing machine specialized for horizontal shapes such as stainless steel channel, aluminum profile, lumber, door, steel rod, pipe, floor board, the wrapped horizontal package well covered by packaging material, such as stretch film,paper, HPDE.... The machine can be connecting to the packing line for automatically wrapping.
u  Installation:
The machine need to be installed on flat & hard ground, where the ground load should be more than 1 ton/m2.

u  Wrapping Station:
a)        Reinforce aluminum cast-solid ring with strong structure makes steady in wrapping
b)        Ring & rubber wheel devices make working more safe stable & energetic.
c)        Friction between driving wheels and ring is adjustable.
d)        Speed of the ring is adjustable by inverter.
e)        Soft start and stop.
f)         Wrapping position reset.
g)        Widely packing material adopted by material frame.
h)        Overlapping is adjustable from 10%-90% by frequency inverter.
i)          Packing material tension can be adjusted.
j)          Packing material tension: Adjustable by special brake device
k)        Protect guardrail for safety operation.
l)          Control cabinet: Easy and safe to operate and maintain

u  Conveyor System:
a)        Conveyor roller for moving the product in and out.
b)        Powered 1000mm infeed conveyor system and 1000mm outfeed conveyor system.
c)        Conveyor driven by motor with gear box.
d)        Speed of conveyor is adjustable by inverter.
e)        Sensor checking the object for operation action.
f)         All moving parts in drive system are well covered by shield.
u   Horizontal orbital Wrapping protective System:
a)        Both side-protective devices adjust by manually to avoid products shaking in wrapping.
b)        Two sets of the right and left protective device.
c)        Pressing down device is controlled by air cylinder.
d)        Pressing down device can protect the object surface well.  
f)         The protective system is fit for product with different frame and structure and non-planar surface.

没有评论:

发表评论