Note: “Ring
speed” and “Roller
speed” not only define the running speed of ring and roller
respectively, but are also in connection with the overlapping of packaging tape.
The two setting parameters can be set by touching. If
the ring speed is high and roller speed is low, the packaging tape features a
large overlapping range; on the contrary, the overlapping range is small.
<0}
Package OD: Input in actual size, with its unit as
“mm”.
Package ID: Input in actual size, with its unit as
“mm”.
Package Width: Input in actual size, with its unit as
“mm”.
ADD Packing Material: When the calculated packing
material by PLC is not enough, add the material appropriately to finish the
packing process. Setting range 0-3， normally be 0.
Package stop station: Used to revise the
deviation of the package stop station. If the package stops when the process is
not completed, increase the setting parameter appropriately to finish the process.
Setting range 0-50.
Once wrapping: In the Auto control mode, when the needed packing
material can be stored in the tape-storage wheel at one time, once wrapping ca
be used. It’s usually the default setting of the equipment.
Twice wrapping: In
the Auto control mode of coil packaging machine, when the needed packing material can not be stored in
the tape-storage wheel at one time, twice wrapping should be used. The packing
process is separated into 2parts and machine will stop automatically when half finished.
