Automatic cable coil coiling machine,cable packing line

1.      Main parameter

Wire Diameter	1.5-12mm
ID of Cable coil	Φ130～Φ150mm
Outer diameter of disc	Φ210-Φ500mm
Width	50,60,80,100mm
Main wrapping speed(high/low)	200-400m/min
Power supply(high/low)	380V 60Hz

Features of cable coil packing machine:

Automatic meter counter:

1.     With up and down wheel, precise encoder count length to centimeter.

2.     Up and down wheel are made with aluminum alloy material,

3.     Up wheel is sprayed with ceramic and hardness process,

4.     Down wheel is covered with strong glue to prevent hurting wire,install single direction bearing to prevent wire inversion

Shake-bobbin head:

1.     air pressure promoter automatically control take-up and pay-off and automatically open and close when winding horizontally.

2.     Automatically stop take-up when reach pre-set length, then shake-bobbin head vertically shrink and lift, don’t clamp wire head and glue wire reel.

Traverse:

Computer control traverse, servo motor drives,

Portal cutter:

1.     Portal cutter,automatic cutting wire when wire reel reach pre-set length.

2.     Cutter is made with special steel material and vacuum heating processed, higher hardness and longer lifetime

Clamp wire device:

1.     After coiling, the machine automatically clamp wire coil and convey to wrapping desk

Control system:

1.     HMI interface, touch screen operation. PLC central system can control winding speed , wire reel length ,alarm , speed adjust, indicator , emergent stop and reset etc function.

2.     It can change wire reel length , wire diameter , wire speed during machine running.

Motor

Winding motor:7.5HPx4P AC motor + vector control Inverter

  Traverse motor : servo motor + servo inverter

Features:

²  Can be linkage with pay-off rack and extruder line

²  Coiling speed is four times than the manual coil

²  Can be linkage with automatic wrapping machine so that automatically wrap PVC film and put up Label after coiling

²  If automatic coiling machine and automatic wrapping machine at the same time operate, the speed will be seven times than manual operation

²  Servo motor traverse, traverse is more perfect and beautiful than manual winding wire

²  PLC can store wire reel specification, when need change wire reel specification, only need to read stored specifications.

²  With automatic inspect wrong function, automatic send signal when wrong come out

²  Performances;

²  Voltage ;AC380V, 3-phase, 50HZ or provided by customer

²  Operation direction: inlet wire from left , or decide by customer

²  Wire diameter :¢1.5-12mm diameter, electric wire, data wire, automobile wire, BV/AV power wire, building wire.

²  Shake-bobbin head speed:200rpm max.

²  Product convey: clamp wire

²  Overlength:unit:0.01m, automatic reduce speed when forecast

²  Traverse: servo motor control traverse, linkage with shake-bobbin machine

²  Electric loop control:Graphic operator interface(PLC)

²  Switch and meter on operation panel:touch screen, speed-adjust button, emergent switch

²  PLC has sparker junction

²  PLC has diameter tester junction

Machine composition:

1.       Meter counter------------------------------------------1 group

2.       Feed wire device---------------------------------------1 group

3.       Portal cutter---------------------------------------------1 group

4.       Shake-bobbin head and wind wire bobbin----------1 group

5.       Traverse device-----------------------------------------1 group

6.       Clamp wire device-------------------------------------1 group

Part Ⅱ: Terms

1.     Price Terms

China Port

2.     Quantity Terms

MOQ: 1 Set or Whole Line, per Item

3.     Warranty Terms

a.     One-year warranty unlimited cycle warranty.

b.    Free technical service/guidance lifetime

c.      10 years warranty on structural frame

Automatic cable coil packaging machine