Technical
Parameter for:
Max load size(mm) 1200 (L)×1300(W) ×1800(H)
Packing efficiency
30-50 loads / hour
Arm speed
3-15rpm
Power supply 1.3KW
220V 50HZ 1Phase
Max load capacity
floor capacity
Air : 0.4-0.6 MPA
Air : 0.4-0.6 MPA
Features
Control System
Control System
²
OMRON PLC
²
Photo-eye pallet height sensor
²
0-9 separate top ,bottom & up-down wrap
count selectors
²
Photoeye sensing delay
²
Reinforce wrap allow more wrap on same
location
²
Film Tension Control adjustment on the panel
²
3¡ª15RPM arm variable a speed by frequency
changer
²
Separate variable carriage up/down
speed
²
Cycle pause capability
²
Separate start, reset and emergency stop
buttons
²
Manual carriage up/down switch
²
Turntable jog button
²
Flash light for machine in operation
²
Rotary arm stop by safety bumper and
reflection photoeye sensing and obstacle in the rotating area
Arm Drive &Support
²
Slewing Bearing drive system
²
Soft start /stop
²
Position arm alignment
Conveyor
-Heavy Structural steel Frame
construction
-All rollers driven
-Heavy Duty Conveyor Guards
-Different Roller Diameters and
Roller Spacing Available for a variety of applications
-Conveyor Speed:12m per min(other
speed available)
-Photo-eye Pallet Sensing and
sequencing
In-feed/Out-feed Conveyor
Sections(optional, by separately)
- Heavy Structural steel Frame construction
- Heavy duty bearing roller support
- All rollers driven
- Heavy Duty Conveyor Guards
- Adjustable Leg Height
- Different Roller Diameters and Roller Spacing Available for a variety of applications
- Photo-eye Pallet Sensing and sequencing
- Heavy Structural steel Frame construction
- Heavy duty bearing roller support
- All rollers driven
- Heavy Duty Conveyor Guards
- Adjustable Leg Height
- Different Roller Diameters and Roller Spacing Available for a variety of applications
- Photo-eye Pallet Sensing and sequencing
Film Delivery System
-Powered pre-stretch system up to 200% to min film
consumption(Prestretch ratio can be specially made according your requirements.)
-Film delivery variable speed by separate DC Drive Motor
-Film dancer-bar with variable speed output
-Rotating Power slip ring provide power required for carriage
drive on rotary arm.
Film
- Two Heavy Duty ANSI #50 Chain Lifts (2)
- Programmable 3/4" HP Variable Speed AC Drive Motor
- AC Motor Control Board
- UHMW-PE Glides on 3/8" CRS Ways (No Maintenance Lifetime Warranty)
- Adjustable Film Roping
- Pneumatic Film Clamp
- Pneumatic Film Alignment Arm
- Pneumatically Activated, Thermostatically Controlled Cutting Device
- Pneumatically Activated Brush
没有评论:
发表评论